Espero by Viper
Moderátor: Blue Lanos
Espero by Viper
Hi, my name is Vedran , I am from Croatia and I drive a 97' Daewoo Espero
So here it is..
it was like this before I got my hands on it
I bought some new rims, from factory 185/65/14 I went to 215/35/18
I had to put some track spacers on the rear axle , 2cm on each side
but then it was normaly very high , it looked like a monster truck
so , I ordered Eibach springs -30mm for it, but by mistake they gave me -30mm for Nexia , and it lowered the front about 70mm and the rear about 40mm , I was very pleased
that was it for a while..
then the project started
because of the big rims, the rear brakes looked silly , so I got the rear axle from a Vectra 2.0
first I dissasembeled it..because it was rusty and didn't work ..
By ViperZG
I got rid of all the rust and painted it in mat black
By ViperZG
the callipers were repaired , fitted with new parts..
By ViperZG
old vs. new discs
By ViperZG
new discs painted in mat black
By ViperZG
all new parts fitted and assembeled
By ViperZG
old vs. new axle
By ViperZG
after a while driving and parking , I scratched a rim , so I decided to repair them and paint them
painted the inside in mat black
By ViperZG
very carefully I had to tape the rim to be painted
By ViperZG
the rims repaired and painted
By ViperZG
on the car with the new disc
By ViperZG
then it was the cars turn, so I started do take it apart
By ViperZG
By ViperZG
By ViperZG
and ready for some bodywork
By ViperZG
By ViperZG
By ViperZG
progress
all the signes are removed from the car, the frot is given a bad look , the rear is changed , rust is fixed , fenders are pulled out etc.
By ViperZG
By ViperZG
and the new rear spacers, 3cm per side
By ViperZG
By ViperZG
the front bad look
By ViperZG
By ViperZG
By ViperZG
By ViperZG
By ViperZG
and finally ready for a little trip
By ViperZG
By ViperZG
The car was then driven 100km like that
The custom front and rear bumper are being made at the moment , as well as the custom sideskirts and rear wing, I expect it to be finished and painted by the end of the week, so till the next report ...
So here it is..
it was like this before I got my hands on it
I bought some new rims, from factory 185/65/14 I went to 215/35/18
I had to put some track spacers on the rear axle , 2cm on each side
but then it was normaly very high , it looked like a monster truck
so , I ordered Eibach springs -30mm for it, but by mistake they gave me -30mm for Nexia , and it lowered the front about 70mm and the rear about 40mm , I was very pleased
that was it for a while..
then the project started
because of the big rims, the rear brakes looked silly , so I got the rear axle from a Vectra 2.0
first I dissasembeled it..because it was rusty and didn't work ..
By ViperZG
I got rid of all the rust and painted it in mat black
By ViperZG
the callipers were repaired , fitted with new parts..
By ViperZG
old vs. new discs
By ViperZG
new discs painted in mat black
By ViperZG
all new parts fitted and assembeled
By ViperZG
old vs. new axle
By ViperZG
after a while driving and parking , I scratched a rim , so I decided to repair them and paint them
painted the inside in mat black
By ViperZG
very carefully I had to tape the rim to be painted
By ViperZG
the rims repaired and painted
By ViperZG
on the car with the new disc
By ViperZG
then it was the cars turn, so I started do take it apart
By ViperZG
By ViperZG
By ViperZG
and ready for some bodywork
By ViperZG
By ViperZG
By ViperZG
progress
all the signes are removed from the car, the frot is given a bad look , the rear is changed , rust is fixed , fenders are pulled out etc.
By ViperZG
By ViperZG
and the new rear spacers, 3cm per side
By ViperZG
By ViperZG
the front bad look
By ViperZG
By ViperZG
By ViperZG
By ViperZG
By ViperZG
and finally ready for a little trip
By ViperZG
By ViperZG
The car was then driven 100km like that
The custom front and rear bumper are being made at the moment , as well as the custom sideskirts and rear wing, I expect it to be finished and painted by the end of the week, so till the next report ...
- Reklama
C/P from other forums..
here is a preview pic of the front bumper..
By ViperZG
Its being painted at the moment , i HOPE it will be completed by saturday 77000000.gif
hope you like it
By ViperZG
By ViperZG
By ViperZG
By ViperZG
And here are some new pics
They were taken 5 minutes after I brought it home, so please dont tell me that the parts "dont fit" because I know..they were onli put on the car for the photos, I will assemble it tommorow..
By ViperZG
By ViperZG
By ViperZG
and the exhaust
By ViperZG
By ViperZG
the diffuser will be paintet in mat black on tuesday , or wednesday, and then I will put the exhaust on drunk.gif
here is a preview pic of the front bumper..
By ViperZG
Its being painted at the moment , i HOPE it will be completed by saturday 77000000.gif
hope you like it
By ViperZG
By ViperZG
By ViperZG
By ViperZG
And here are some new pics
They were taken 5 minutes after I brought it home, so please dont tell me that the parts "dont fit" because I know..they were onli put on the car for the photos, I will assemble it tommorow..
By ViperZG
By ViperZG
By ViperZG
and the exhaust
By ViperZG
By ViperZG
the diffuser will be paintet in mat black on tuesday , or wednesday, and then I will put the exhaust on drunk.gif
Tohle je paráda-peha- píše:Téda páni Esperáci tečú vám slinky há
je to fakt parádný kúsok
Tohle už je trochu mimo, ztratilo to Bertoneho duši.
Je to jen můj názor, Ivoši prosím přelož mu to, díky
Megane Grandtour ,Chevy Trax diesel automat
Sen- http://www.youtube.com/watch?v=mhAT0Bm1gjg&feature=related
Jde o politováníhodný omyl, který se stává maximálně dvakrát za deset let.
Přéčinó bela chebná elektronka E13 z našeho podniko Katoda Olomóc.
80% mozku tvoří kapalina u některých brzdová
Sen- http://www.youtube.com/watch?v=mhAT0Bm1gjg&feature=related
Jde o politováníhodný omyl, který se stává maximálně dvakrát za deset let.
Přéčinó bela chebná elektronka E13 z našeho podniko Katoda Olomóc.
80% mozku tvoří kapalina u některých brzdová
- JRD McLAREN
- Příspěvky: 3599
- Registrován: ned říj 10, 2004 20:09
- Bydliště: Mexico City
- Kontaktovat uživatele:
Here are some new pics , the car still isnt finnished , I have to do a few things on the outside , a few details that will complete the car..
and the bumpers still arent fixed properly , i will do that tommorow..
By ViperZG
By ViperZG
By ViperZG
By ViperZG
By ViperZG
By ViperZG
By ViperZG
By ViperZG
By ViperZG
By ViperZG
By ViperZG
By ViperZG
By ViperZG
and the bumpers still arent fixed properly , i will do that tommorow..
By ViperZG
By ViperZG
By ViperZG
By ViperZG
By ViperZG
By ViperZG
By ViperZG
By ViperZG
By ViperZG
By ViperZG
By ViperZG
By ViperZG
By ViperZG
- Hanzy
- Příspěvky: 7197
- Registrován: ned led 21, 2007 13:16
- Bydliště: Frýdek-Místek - Baška/Hodoňovice/Velké Karlovice
Jednim slovem PARADA!!!
Alhambra+Sharan 4x4 klepotřepčmoud Taxi Valach
VW Transporter T4 2.5 TDI klepačotřepočmoud
Captiva 3.2 V6 LPG
Opel Combo CNG
Evanda 2.0 CDX LPG - už ji prohání brácha
CRUZE 1.6 LS+ moja na kolem chalupy od 9/2016 LPG
Ex Captiva zlatá metla 2.0 klepočmoud rachotila šla pryč
Ex Leganza 2.0 CDX LPG
VW Transporter T4 2.5 TDI klepačotřepočmoud
Captiva 3.2 V6 LPG
Opel Combo CNG
Evanda 2.0 CDX LPG - už ji prohání brácha
CRUZE 1.6 LS+ moja na kolem chalupy od 9/2016 LPG
Ex Captiva zlatá metla 2.0 klepočmoud rachotila šla pryč
Ex Leganza 2.0 CDX LPG
Very,very good work! Congratulations!
Š 100 / Š 125 L / Š 120 / Š 136 GL / Daewoo Nexia sedan / Citroën Berlingo
_______________________________________
<a href="http://www.spritmonitor.de/en/detail/213805.html" target="_blank"><img src="http://images.spritmonitor.de/213805_5.png" alt="Spritmonitor.de" border="0"></a>
_______________________________________
<a href="http://www.spritmonitor.de/en/detail/213805.html" target="_blank"><img src="http://images.spritmonitor.de/213805_5.png" alt="Spritmonitor.de" border="0"></a>